|
General Maintenance Instructions
1. Periodically check the fasteners and tighten if necessary. The fasteners
should not loosen regularly; if they do, there is an installation problem
that should be resolved.
2. Clean the product routinely by following the cleaning instructions
below.
Finish
Cleaning Instructions
CAUTION:
Always try the recommended procedure in a small inconspicuous spot prior to
treating the entire article to verify it works on your particular
application and you are satisfied with the results.
NOTE:
Frequent cleaning extends the life of all finishes.MAINTECode
Finish Cleaning Instructions
US3
|
Polished & lacquered brass |
Use a soft cloth and mild soap and water. Never use brass polish or an
abrasive cleaner unless you intend to remove all lacquer and totally
refinish the product. |
|
US3NL |
Polished unlacquered brass |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S.
C. Johnson Company. |
|
US4 |
Satin finish & lacquered brass |
Use a soft cloth and mild soap and water. Never use brass polish or an
abrasive cleaner unless you intend to remove all lacquer and totally
refinish the product. |
|
US9 |
Polished & lacquered bronze |
Use a soft cloth and mild soap and water. Never use brass polish or an
abrasive cleaner unless you intend to remove all lacquer and totally
refinish the product. |
|
US10 |
Satin finished & lacquered bronze |
Use a soft cloth and mild soap and water. Never use brass polish or an
abrasive cleaner unless you intend to remove all lacquer and totally
refinish the product. |
|
US10B |
Oxidized & oiled bronze |
Use a soft cloth and a paste furniture wax. Buff lightly so as not to
remove the dark oxide coating where it remains. |
|
US26 |
Polished chrome plated |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S.
C. Johnson Company. |
|
US26D |
Satin chrome plated |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S.
C. Johnson Company. |
|
US28 |
Anodized aluminum |
Use a soft cloth and mild soap and water. |
|
313/315 |
Dark bronze or black anodized aluminum |
Use a soft cloth and mild soap and water. |
|
US32 |
Polished stainless steel |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S.
C. Johnson Company. |
|
US32D |
Satin stainless steel |
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S.
C. Johnson Company. |
|
US3LIFETIME |
Brass |
Use a soft cloth and mild soap and water. Use a soft cloth and a good
metal cleaner. |
WARRANTY:
All
products are warranted to be free of defects in material and workmanship for
the period of one (1) year from date of shipment. We reserve the right to
replace or repair any product found defective within this period. No other
warranty expressed or implied is valid.
|
