 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
||
 |
 |
|
 |
 |
 |
 |
 |
 |
|
"Our Name Opens Many Doors" |
 |
Shower Door Pulls |
||||||||||||
Prep glass with required size holes at same
center to center dimensions as the item to be installed. See Figure F drawing for
location of nylon washers and vinyl spacers. Install two Fig. F finish buttons thru glass
and into pull or towel bar with washers and spacers in place. Tighten Fig. F buttons
securely with spanner wrench or hardened rod (not included with hardware). Installation
complete. |
 |
|||||||||||
Pulls or Towel Bars BTB Mounted with Same Center to Center Prep glass with required size holes at same
center to center dimensions as the items to be installed. Fasten ¼-20 prep pull or towel
bar to shower door with the two P-set shoulder bolts. See Figure G drawing for location of
nylon washers, stainless steel washers, and vinyl spacers. Tighten shoulder bolts
securely. Slip second pull or towel bar over shoulder bolts. Tighten set screws securely.
Installation complete. |
|
|||||||||||
Pull and Towel Bar BTB Mounted with Different Center to Center Prep glass with required size holes at same center to center dimensions as pull and towel bar to be installed. Fasten pull to inside of shower door with Fig. F mounting at free end of pull and P-set shoulder bolt at back to back end. Refer to Figure F drawing and Figure G drawing for location of nylon washers, stainless steel washers, and vinyl spacers. Tighten securely. Slip towel bar over shoulder bolt. Fasten free and with Fig. F mounting, spacers, and washers. Tighten set screws at back to back mounting. Installation complete.
|
||||||||||||
|
||||||||||||
|
|
||||||||||||
